Develop a job on Databricks using Databricks Asset Bundles

Databricks Asset Bundles, also known simply as bundles, contain the artifacts you want to deploy and the settings for Databricks resources such as jobs that you want to run, and enable you to programmatically validate, deploy, and run them. See What are Databricks Asset Bundles?.

This article describes how to create a bundle to programmatically manage a job. See Schedule and orchestrate workflows. The bundle is created using the Databricks Asset Bundles default bundle template for Python, which consists of a notebook paired with the definition of a job to run it. You then validate, deploy, and run the deployed job in your Databricks workspace.

Tip

If you have existing jobs that were created using the Databricks Jobs user interface or API that you want to move to bundles, you must define them in a bundle’s configuration files. Databricks recommends that you first create a bundle using the steps below and then validate whether the bundle works. You can then add additional job definitions, notebooks, and other sources to the bundle. See Add an existing job definition to a bundle.

Requirements

Databricks CLI version 0.218.0 or above. To check your installed version of the Databricks CLI, run the command databricks -v. To install the Databricks CLI, see Install or update the Databricks CLI.
The remote Databricks workspace must have workspace files enabled. See What are workspace files?.

Create a bundle using a project template

First, create a bundle using the Databricks Asset Bundles default Python template. For more information about bundle templates, see Databricks Asset Bundle project templates.

If you want to create a bundle from scratch, see Create a bundle manually.

Step 1: Set up authentication

In this step, you set up authentication between the Databricks CLI on your development machine and your Databricks workspace. This article assumes that you want to use OAuth user-to-machine (U2M) authentication and a corresponding Databricks configuration profile named DEFAULT for authentication.

Note

U2M authentication is appropriate for trying out these steps in real time. For fully automated workflows, Databricks recommends that you use OAuth machine-to-machine (M2M) authentication instead. See the M2M authentication setup instructions in Authentication.

Use the Databricks CLI to initiate OAuth token management locally by running the following command for each target workspace.

In the following command, replace <workspace-url> with your Databricks workspace instance URL, for example https://dbc-a1b2345c-d6e7.cloud.databricks.com.
```
databricks auth login --host <workspace-url>
```
The Databricks CLI prompts you to save the information that you entered as a Databricks configuration profile. Press Enter to accept the suggested profile name, or enter the name of a new or existing profile. Any existing profile with the same name is overwritten with the information that you entered. You can use profiles to quickly switch your authentication context across multiple workspaces.

To get a list of any existing profiles, in a separate terminal or command prompt, use the Databricks CLI to run the command databricks auth profiles. To view a specific profile’s existing settings, run the command databricks auth env --profile <profile-name>.
In your web browser, complete the on-screen instructions to log in to your Databricks workspace.
To view a profile’s current OAuth token value and the token’s upcoming expiration timestamp, run one of the following commands:
- databricks auth token --host <workspace-url>
- databricks auth token -p <profile-name>
- databricks auth token --host <workspace-url> -p <profile-name>
If you have multiple profiles with the same --host value, you might need to specify the --host and -p options together to help the Databricks CLI find the correct matching OAuth token information.

Step 2: Initialize the bundle

Initialize a bundle using the default Python bundle project template.

Use your terminal or command prompt to switch to a directory on your local development machine that will contain the template’s generated bundle.
Use the Databricks CLI to run the bundle init command:
```
databricks bundle init
```
For Template to use, leave the default value of default-python by pressing Enter.
For Unique name for this project, leave the default value of my_project, or type a different value, and then press Enter. This determines the name of the root directory for this bundle. This root directory is created in your current working directory.
For Include a stub (sample) notebook, select yes and press Enter.
For Include a stub (sample) DLT pipeline, select no and press Enter. This instructs the Databricks CLI to not define a sample Delta Live Tables pipeline in your bundle.
For Include a stub (sample) Python package, select no and press Enter. This instructs the Databricks CLI to not add sample Python wheel package files or related build instructions to your bundle.

Step 3: Explore the bundle

To view the files that the template generated, switch to the root directory of your newly created bundle. Files of particular interest include the following:

databricks.yml: This file specifies the bundle’s programmatic name, includes a reference to the job definition, and specifies settings about the target workspace.
resources/<project-name>_job.yml: This file specifies the job’s settings, including a default notebook task.
src/notebook.ipynb: This file is a sample notebook that, when run, simply initializes an RDD that contains the numbers 1 through 10.

For customizing jobs, the mappings in a job declaration correspond to the request payload, expressed in YAML format, of the create job operation as documented in POST /api/2.1/jobs/create in the REST API reference.

Tip

You can define, combine, and override the settings for new job clusters in bundles by using the techniques described in Override cluster settings in Databricks Asset Bundles.

Step 4: Validate the project’s bundle configuration file

In this step, you check whether the bundle configuration is valid.

From the root directory, use the Databricks CLI to run the bundle validate command, as follows:
```
databricks bundle validate
```
If a summary of the bundle configuration is returned, then the validation succeeded. If any errors are returned, fix the errors, and then repeat this step.

If you make any changes to your bundle after this step, you should repeat this step to check whether your bundle configuration is still valid.

Step 5: Deploy the local project to the remote workspace

In this step, you deploy the local notebook to your remote Databricks workspace and create the Databricks job within your workspace.

From the bundle root, use the Databricks CLI to run the bundle deploy command as follows:
```
databricks bundle deploy -t dev
```
Check whether the local notebook was deployed: In your Databricks workspace’s sidebar, click Workspace.
Click into the Users > <your-username> > .bundle > <project-name> > dev > files > src folder. The notebook should be in this folder.
Check whether the job was created: In your Databricks workspace’s sidebar, click Workflows.
On the Jobs tab, click [dev <your-username>] <project-name>_job.
Click the Tasks tab. There should be one task: notebook_task.

If you make any changes to your bundle after this step, you should repeat steps 4-5 to check whether your bundle configuration is still valid and then redeploy the project.

Step 6: Run the deployed project

In this step, you trigger a run of the Databricks job in your workspace from the command line.

From the root directory, use the Databricks CLI to run the bundle run command, as follows, replacing <project-name> with the name of your project from Step 2:
```
databricks bundle run -t dev <project-name>_job
```
Copy the value of Run URL that appears in your terminal and paste this value into your web browser to open your Databricks workspace. See View and run a job created with a Databricks Asset Bundle
In your Databricks workspace, after the job task completes successfully and shows a green title bar, click the job task to see the results.

If you make any changes to your bundle after this step, you should repeat steps 4-6 to check whether your bundle configuration is still valid, redeploy the project, and run the redeployed project.

Step 7: Clean up

In this step, you delete the deployed notebook and the job from your workspace.

From the root directory, use the Databricks CLI to run the bundle destroy command, as follows:
```
databricks bundle destroy -t dev
```
Confirm the job deletion request: When prompted to permanently destroy resources, type y and press Enter.
Confirm the notebook deletion request: When prompted to permanently destroy the previously deployed folder and all of its files, type y and press Enter.
If you also want to delete the bundle from your development machine, you can now delete the local directory from Step 2.

Add an existing job definition to a bundle

You can use an existing job as the basis to define a job in a bundle configuration file. To get an existing job definition, you can manually retrieve it using the UI, or you can generate it programmatically using the Databricks CLI.

For information about the job definition in bundles, see job.

Get an existing job definition using the UI

To get the YAML representation of an existing job definition from the Databricks workspace UI:

In your Databricks workspace’s sidebar, click Workflows.
On the Jobs tab, click your job’s Name link.
Next to the Run now button, click the kebab, and then click Switch to code (YAML).
Add the YAML that you copied to your bundle’s databricks.yml file, or create a configuration file for your job in the resources directory of your bundle project and reference it from your databricks.yml file. See (/dev-tools/bundles/settings.md#resources).
Download and add any Python files and notebooks that are referenced in the existing job to the bundle’s project source. Typically bundle artifacts are in the src directory in a bundle.

Tip

You can export an existing notebook from a Databricks workspace into the .ipynb format by clicking File > Export > IPython Notebook from the Databricks notebook user interface.

After you add your notebooks, Python files, and other artifacts to the bundle, make sure that your job definition properly references them. For example, for a notebook named hello.ipynb that is in the src directory of the bundle:
```
resources:
  jobs:
    hello-job:
      name: hello-job
      tasks:
      - task_key: hello-task
        notebook_task:
          notebook_path: ../src/hello.ipynb
```

Generate an existing job definition using the Databricks CLI

To programmatically generate bundle configuration for an existing job:

Retrieve the ID of the existing job from the Job details side panel for the job in the Jobs UI, or use the Databricks CLI databricks jobs list command.
Run the bundle generate job Databricks CLI command, setting the job ID:
```
databricks bundle generate job --existing-job-id 6565621249
```
This command creates a bundle configuration file for the job in the bundle’s resources folder and downloads any referenced artifacts to the src folder.

Tip

If you first use bundle deployment bind to bind a resource in a bundle to one in the workspace, the resource in the workspace is updated based on the configuration defined in the bundle it is bound to after the next bundle deploy. For information on bundle deployment bind, see Bind bundle resources.

Configure a job that uses serverless compute

The following examples demonstrate bundle configurations to create a job that uses serverless compute.

To use serverless compute to run a job that includes notebook tasks, omit the job_clusters configuration from the bundle configuration file.

# yaml-language-server: $schema=bundle_config_schema.json
bundle:
  name: baby-names

resources:
  jobs:
    retrieve-filter-baby-names-job-serverless:
      name: retrieve-filter-baby-names-job-serverless
      tasks:
        - task_key: retrieve-baby-names-task
          notebook_task:
            notebook_path: ./retrieve-baby-names.py
        - task_key: filter-baby-names-task
          depends_on:
            - task_key: retrieve-baby-names-task
          notebook_task:
            notebook_path: ./filter-baby-names.py

  targets:
    development:
      workspace:
        host: <workspace-url>

To use serverless compute to run a job that includes Python tasks, include the environments configuration.

# yaml-language-server: $schema=bundle_config_schema.json
bundle:
  name: serverless-python-tasks

resources:
jobs:
  serverless-python-job:
    name: serverless-job-with-python-tasks

    tasks:
      - task_key: wheel-task-1
        python_wheel_task:
          entry_point: main
          package_name: wheel_package
        environment_key: Default

    environments:
      - environment_key: Default
        spec:
          client: "1"
          dependencies:
            - workflows_authoring_toolkit==0.0.1

targets:
  development:
    workspace:
      host: <workspace-url>

See Run your Databricks job with serverless compute for workflows.